Eaton i-onEX Series - After an Alarm; To Start a HUA from the Keypad

i-on40 & i-onEX Range
Page 110
After an Alarm
IN ORDER TO:
DO THIS:
THE SYSTEM WILL:
Switch off siren:
EITHER:
Key in ACCESS CODE
OR present tag.
Stop the siren. The
keypad display shows the
first zone to alarm.
Reset the system:
Press .
Keypad display shows
time and date.
Read the log:
Press + ACCESS
CODE (or tag) + 3 + .
Keypad display shows
most recent event.
Press .
Keypad display shows
older events.
Press .
Keypad display shows
newer events.
For more information see page 16 .
To Start a HUA from the Keypad
Press both the HUA keys at the same time.