Eaton i-onEX Series - Editing Existing Users

4. Administration i-on40 & i-onEX Range
Page 40
Editing Existing Users
This menu lets you change the details for an existing user. Note that you cannot
edit a user when the partition they belong to is set.
Name
Use this option to give the user a name up to 12 characters long.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


5. Press .


6. Press  .


7. Press  .
The bottom line of the display
shows the first in a list of the users
already programmed into the
control unit. If the user already has
a name programmed it will appear
on the bottom line.


8. Press  or  to display the user
you wish to edit.
(Alternatively, if you already know
their user number, you can key that
in and the display will show that
user immediately; for example
“003” on an i-on50EX or i-
on160EX, or “03” on an i-on40 or i-
on50EX.)

