Eaton i-onEX Series - Page 110

4. Administration i-on40 & i-onEX Range
Page 104
8. Press  until the display shows the
telephone number that you wish to
change, for example:


9. Press .
The display shows the current
phone number, for example:


10. Key in the new phone number.
If necessary, press  to move the
cursor left, or  to move the cursor
to the right. Press  to remove
digits to the left of the cursor.


11. Press  to store the changes you
have made.
The display now shows the current
name of the telephone number.


12. If necessary, key in a new name for
the telephone number, for example:
(See page 37 for instructions on
how to key in text.)


13. Press  to store the changes you
have made.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


14. Press  repeatedly to leave the
menu.

