Eaton i-onEX Series - Page 32

3. Setting and Unsetting i-on40 & i-onEX Range
Page 26
Final Door Set:
a. The keypad sounds the exit tone
(an interrupted tone if the final exit
door is open, a continuous tone if
the exit door is closed). The top
line of the display shows the part
of the system being set, the
bottom line shows “Final Door
Set”.


b. Leave by the designated exit door.
c. Remember to close the door.
The system sets.


Lock Set:
a. The keypad sounds the exit tone
(an interrupted tone if the final exit
door is open, a continuous tone if
the exit door is closed). The top
line of the display shows the part
of the system being set, the
bottom line shows “Lock Set”.


b. Leave by the designated exit door.
c. Remember to close the door.
d. Wait until you can hear a
continuous tone and then lock the
door.
The system sets.


How Do I Know The System Is Set?
When the system sets the keypad
briefly shows:


followed by: