Eaton i-onEX Series - Page 51

i-on40 & i-onEX Range 4. Administration
Page 45
4. Press  .


If you are a Master or Admin User:
(otherwise go to step 6)
5. Press .


a) Press .


b) Press .


c) Press  or . until the bottom
line of the display shows your own
user name or number.


d) Press .


e) Press  or . until the bottom line of
the display shows:


f) Go on to step 6.
If you are a Normal User:
6. Press .


7. Press .


8. Key in the new access code .
Access codes are four digits long
(for Security Grade 2 or i-
on30EX/i-on40) or six digits long
(for Security Grade 3). When you
press the last digit of the access
code the display asks you to
confirm by keying in the same
code again.


9. Key in the same digits again, in
the same order.
The keypad gives a double “beep”


followed by: