Eaton 30 kVA Mini Power Distribution Unit Installation and Operation Manual 164001117—Rev 01 9
Figure 3. Mini PDU to Cable Ladder Bracket Attachment Points
Install the Cable Ladder over the Cable Ladder Bracket as shown below.
Screws to secure the Cable Ladder to its Bracket are stored in the (4) PEM nuts of the Bracket. (Specification:
Screw, 3/8”-16 X .75” lg., Hex Hd, Serrated Flange, Steel)
The Cable Ladder should also be supported by attaching the top of the Cable Ladder to the customer’s cable
trough.
Installation
To Next Page
Loading...
