Eaton Mini PDU - Page 22

10 Eaton 30 kVA Mini Power Distribution Unit Installation and Operation Manual 164001117—Rev 01
Figure 4. Cable Ladder Attachment
Screws for attaching
Cable Ladder will be
stored in the Bracket’s
PEM nuts.
Aluminum Cable Ladder
(12”W x 4”D x 72”H)
Part Number = MIS68130
• A licensed electrician must install the Mini PDU and connect external cables and wiring.
• Installers should use Lock-Out/Tag-Out procedures and observe other precautions listed in the introductory
Safety section.
• Power wiring and grounding must comply with NEC and applicable local codes.
Installation