Eaton PowerXL DH1 Series - Page 15

Instruction Leaflet IL040029EN
Effective December 2017
PowerXL DH1 Series VFD
EATON www.eaton.com 15
International cable and fuse sizes—208 Vac to 240 Vac Ratings

Notes

Line and motor cable size is selected according to IEC 60364-5-52:2009 Table B.52.4 for copper conductor with PVC insulation with a wiring condition of ambient temperature 30 °C in air and an installation
method of “B2” (cables in conduit and cable trunking systems). For other wiring conditions, please refer to the standard of IEC 60364-5-52:2009 for suitable cable sizes.

Earthing conductor size is determined by the cross-sectional area of phase conductors according to IEC/EN 61800-5-1:2007 Table 5. So if phase conductor size is changed, earthing conductor size should also be
changed accordingly.

If power cubes or bypass are used, a Class gG/gL fuse is recommended.

FR0 is not available till June 2018.
Frame size
Amp
suffix
208 V input
current
(VT/I
L
)
Current
(VT/I
L
)
at 40 °C
Fuse
rating
(gG/gL)

Mains and
motor cable
Cu (mm
2
)
Terminal cable size
Main terminal
Cu (mm
2
)
Earth terminal
Cu (mm
2
)
FR0

4D8 5.6 4.8 10 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
6D6 7.6 6.6 10 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
7D8 9 7.8 16 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
FR1 4D8 4.4 4.8 6 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
6D6 6.1 6.6 10 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
7D8 7.2 7.8 16 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
011 10.2 11 16 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
012 11.6 12.5 16 3*1.5+1.5 0.2–6 solid or
0.2–4 stranded
0.75–6
FR2 017 16.3 17.5 20 3*4+4 0.5–16 4–16
025 23.2 25 32 3*4+4 0.5–16 4–16
031 29 31 32 3*6+6 0.5–16 4–16
FR3 048 44.2 48 50 3*16+16 16–35 2.5–25
061 56 61 63 3*16+16 16–35 2.5–25
FR4 075 64.6 75 80 3*25+16 16–50 6–50
088 78 88 100 3*35+16 16–50 6–50
114 94.3 114 125 3*50+25 16–50 6–50
FR5 143 129 143 160 3*70+35 50–185 10–120
170 157 170 200 3*95+50 50–185 10–120
211 189 211 250 3*150+95 50–185 10–120
FR6 261 242.8 261 400 2*(3*70+35) 2*(50–150) 35–150
312 290.3 312 400 2*(3*95+50) 2*(50–150) 35–150