Need help?Do you have a question about the Eaton MMX34 Series and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Control Modes | Speed, Torque |
| Operating Temperature | 0°C to 40°C |
| Protection | Overcurrent, Overvoltage, Over Temperature, Short Circuit |
| Relative Humidity | 5 to 95% non-condensing |
| Altitude | Up to 1000m without derating |
Covers safety aspects and switching requirements for installation.
Details measures to ensure electromagnetic compatibility in drive systems.
Explains proper grounding procedures for EMC compliance and safety.
Covers general procedures and safety precautions for electrical wiring work.
Outlines procedures for insulation resistance testing of cables and motor windings.
Describes connecting control signal terminals under the front cover flap.
Provides a checklist to ensure proper setup before operating the frequency converter.
Lists critical hazard warnings and safety notes for operation.
Guides through basic commissioning using control signal terminals with factory settings.
Explains how faults are displayed and automatically disabled.
Covers parameters for defining operating conditions for the frequency inverter.
Covers functions for DC braking, regenerative braking, and mechanical braking.
Provides a comprehensive list of all parameters with their properties and page references.
To Next Page
