Eaton REC Series - Aisle Containment Steps 6-7: Door and Roof Panel Installation

20
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
7
7
11
ROOF PANEL
DOOR FRAME
Installation Guide
 Step – 6
Referring to images below, offer-up door frame to cabinets and attach using clamp plates,
item 11, and M6 x 16mm screws, item 7 from inside the cabinets, in 4 positions.
CLAMP PLATE
11
M6 x 16mm
SCREW 7
CABINET VERTICAL
 Step – 7
Fit roof panel using 4 off M6 x 16mm screws, item 7.