Eaton REC Series - Aisle Containment Steps 9-10: Bump Stops and Opening Mechanism

22
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
Installation Guide
 Step – 10
The door-set is fitted with an opening mechanism which enables the master door to be
opened from inside the aisle. To open the door from inside the aisle pull button while
lifting latch (refer to images below), and push master door to the open position.
STEP 1 PULL
Release latch shown in open position Release latch shown in Closed position
 Step – 9
Fit the self adhesive bump-stops to doors as shown (refer to image below)
Bump Stop positioned
on doors.
STEP 2 LIFT