Eaton RPR-2 - Default Chapter; Table of Contents

iii
Instruction Book IB182071EN
July 2018
Remote Power Racking System
(RPR-2)
www.eaton.com
Table of Contents
SECTION 1: INTRODUCTION 4
1.1 VISUAL PRESENTATION 4
1.2 QUICK RESPONSE CODE 4
SECTION 2: SAFE PRACTICES 6
SECTION 3: RECEIVING, HANDLING, AND STORAGE 7
3.1 RECEIVING 7
3.2 HANDLING 7
3.3 STORAGE 7
3.4 RPR-2 APPROXIMATE WEIGHTS 7
SECTION 4: RACKING PROCEDURES 10
4.1 INSERTING POWER CIRCUIT BREAKERS 10
4.2 REMOVING POWER CIRCUIT BREAKERS 12
SECTION 5: WARRANTY 13
5.1 GENERAL 13
5.2 PROCEDURE FOR POWER MODULE REMOVAL 13
5.3 REMOVING UPS MODULE FROM RPR-2 DEVICE 14
5.4 REPLACEMENT OF THE UPS MODULE BATTERIES 15
SECTION 6: REPLACEMENT PARTS 16
6.1 GENERAL 16
6.2 ORDERING INSTRUCTIONS 16
APPENDIX A: ITE-HK AIR CIRCUIT BREAKER 17
A.1 INSERTION PROCEDURE USING THE RPR-2 17
A.2 REMOVAL PROCEDURE USING THE RPR-2 18
APPENDIX B: GE AM-5 CIRCUIT BREAKER 19
B.1 INSERTION PROCEDURE USING THE RPR-2 19
B.2 REMOVAL PROCEDURE USING THE RPR-2 20
APPENDIX C: GE MAGNEBLAST VERTICAL LIFT 21
C.1 INSERTION PROCEDURE USING THE RPR-2 21
C.2 REMOVAL PROCEDURE USING THE RPR-2 23
APPENDIX D: WESTINGHOUSE DH AIR CIRCUIT BREAKERS 24
D.1 INSERTION PROCEDURE USING THE RPR-2 24
D.2 REMOVAL PROCEDURE USING THE RPR-2 25