Eaton SV9000 - 9.1 Torque reference selection; 9.2 Torque reference scaling bias

SV9000 Motor Pump Enhanced Protection Application Page 23 (60)
4 = Reducing torque supervision limit.
The set torque supervision limit can be reduced with the free analog input signal
between 0 and set supervision limit (par. 3.11), see figure 6.2-7.
Torque limit
100%
Par. 3.11
0
Free analog
input
Signal range
Figure 6.2-7: Reducing Torque Supervision Limit
2.17 Motorized potentiometer ramp time
Defines how fast the electronic motor potentiometer value changes.
2.18 Option board A
in1
signal inversion
0 = no inversion
2.19 Option board A
in1
signal filter time
Filters out disturbances from the incoming analog A
in1
signal. Long filtering time makes
regulation response slower.
2.20 Option board A
in2
signal range
0 = 0—20 mA
1 = 4—20 mA
2 = 0—10 V (must be used with SV9IOC102CN)
2.21 Option board A
in2
signal inversion
0 = no inversion
2.22 Option board A
in2
signal filter time
Filters out disturbances from the incoming analog A
in2
signal. Long filtering time makes
regulation response slower.