Eaton SV9000 - 9.3 Torque reference scaling gain; 9.4 TC time constant

Page 24 (60) Motor Pump Enhanced Protection Application SV9000
6.2.2 Group 3, Analog Output and supervision parameters
3.1 Analog output function
See table “Group 3, Output and supervision parameters”.
3.2 Analog output filter time
Filters the analog output signal. See figure 6.2-8.
t (sec.)
Unfiltered signal
%
100%
63%
Filtered signal
Par. 3.2
Figure 6.2-8: Analog Output Filtering
3.3 Analog output inversion
Inverts analog output signal:
See figure 6.2-9.
max. output signal = minimum set value
min. output signal = maximum set value
0 50% 100%
20 mA
12 mA
10 mA
4 mA
0 mA
Par. 3.5 = 100%
Par. 3.5 = 50%
Analog
output
current
Max. value of signal
selected by Par. 3.1
Figure 6.2-9 Analog Output Inversion