Eaton SV9000 - Page 56

SV9000 Motor Pump Enhanced Protection Application Page 51 (60)
12.7 Digital output DO1 on delay
12.8 Digital output DO1 off delay
12.9 Relay output RO1 on delay
12.10 Relay output RO1 off delay
12.11 Relay output RO2 on delay
12.12 Relay output RO2 off delay
12.13 Relay output RO3 on delay
12.14 Relay output RO3 off delay
12.15 Relay output RO4 on delay
12.16 Relay output RO4 off delay
12.17 Relay output RO5 on delay
12.18 Relay output RO5 off delay
With these parameters it is possible to set on- and off-delays for the digital and relay
outputs. See figure 6.2-27.
OFF
Delay
ON
Delay
D0, R01 or R02 output
Signal programmed
to digital or relay output
Figure 6.2-27. Digital and Relay Output On- and Off-Delays