Eaton VCP-W Series Instruction Book

19
Instruction Book IB182312EN June 2016 www.eaton.com
50/75/150 VCP-W
Selectable Ground and Test Device
SECTION 7: REPLACEMENT OF
COMPONENTS
7.1 GENERAL
In order to minimize production downtime, it is recommended that
an adequate quantity of spare parts carried in stock. The quantity
will vary from customer to customer, depending upon the service
severity and continuity requirements. Each customer should develop
his own level based on operating experience.
7.1.1 ORDERING INSTRUCTIONS
1. Always specify the selectable ground and test device rating
information and general order number, from the nameplate.
2. Describe the item, give the style number, and specify the
quantity required.
3. Specify the method of shipping desired.
4. Send all orders or correspondence to the nearest Eaton’s
Electrical Services & Systems sales office.
5. Include negotiation number with order when applicable.
Table 5. Common Replacement Parts
ITEMS DESCRIPTIONS
CURRENT
EATON STYLE
NUMBER
DISCONNECTS
Primary
Disconnects
1200 / 2000 Primary Disconnect Assembly 94B8000G98
3000 Primary Disconnect Assembly 94B8000G99

Eaton VCP-W Series Specifications

General

Brand	Eaton
Model	VCP-W Series
Category	Circuit breakers
Language	English