Eaton VCP-W Series - Default Chapter; Table of Contents

iii
Instruction Book IB182312EN June 2016 www.eaton.com
50/75/150 VCP-W
Selectable Ground and Test Device
Table of Contents
SECTION 1: INTRODUCTION 4
1.1 AVAILABLE 150 VCP-W SELECTABLE
GROUND AND TEST DEVICES 4
SECTION 2: SAFE PRACTICES 6
SECTION 3: RECEIVING, HANDLING, AND STORAGE 7
3.1 RECEIVING 7
3.2 HANDLING 7
3.3 STORAGE 8
3.4 APPROXIMATE WEIGHT BY TYPE 8
SECTION 4: DESCRIPTION AND OPERATION 11
4.1 INSULATING BARRIERS 11
4.2 BUSHINGS AND DISCONNECTING CONTACT ASSEMBLIES 11
4.3 GROUNDING CONTACTS 11
4.4 BREAKER-CELL CODING PLATES 11
4.5 CELL POSITION DESCRIPTION 11
4.6 DEVICE AMPERAGE CONVERSION PROCEDURE 13
SECTION 5: INSTALLATION & INSPECTION 14
5.1 EXAMINATION FOR DAMAGE 14
5.1.1 NAMEPLATE VERIFICATION 14
5.2 OPERATING PROCEDURE 14
5.5 INSERTION PROCEDURE 16
5.5 REMOVAL PROCEDURE 16
SECTION 6: INSPECTION AND MAINTENANCE 18
6.1 INTRODUCTION 18
6.2 FREQUENCY OF INSPECTION 18
6.3 INSPECTION AND MAINTENANCE PROCEDURES 18
6.4 INSULATION INTEGRITY CHECK 18
SECTION 7: REPLACEMENT OF COMPONENTS 19
7.1 GENERAL 19
7.1.1 ORDERING INSTRUCTIONS 19