Eaton Vickers V-104-C-10 User Manual

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

I-3100-SReprinted 12/1/86

Single Stage Single and

Double Vane Pumps

V104, 124, 134,144 V109, 129, 139, 149

V105, 125, 135, 145 V35*, 36*, 45*, 46*

V108, 128, 138, 148 (V)VF-**-**, (V)VG-**-**

Vickers

®

Vane Pumps

Overhaul Manual

Questions and Answers:

C
Christina KramerAug 16, 2025
What to do if my Eaton Vickers V-104-C-10 Water Pump is not delivering fluid?
- A
  Alexander RamirezAug 17, 2025
  If your Eaton Water Pump isn't delivering fluid, several issues could be the cause. First, the pump might be driven in the wrong direction; immediately reverse it to prevent seizure and check the drive rotation against the arrow on the pump body. Other potential causes include a broken drive shaft or sheared shaft key, a blocked fluid intake pipe, air leaks at the intake, a low oil level, or vanes stuck in rotor slots. Check each of these possibilities, and take corrective actions such as replacing damaged parts or adding new fluid of the proper viscosity.
W
Wendy OchoaAug 19, 2025
Why is my Eaton Vickers V-104-C-10 Water Pump making noise?
- J
  Jason LawsonAug 19, 2025
  If your Eaton Water Pump is making noise, it could be due to several reasons. A partially clogged intake strainer or restricted intake pipe, a defective bearing, an air leak at the pump intake piping joints or pump shaft seal, or coupling misalignment could be the cause. To troubleshoot, drain the system and clean the intake pipe, and clean or replace the strainer. Also, test for air leaks by pouring oil on joints and around the drive shaft and listen for a change in operation. If there is a defective bearing, disassemble the pump and replace it. Re-align shafts to fix coupling misalignment.
B
Brandon JohnsonAug 22, 2025
How to fix air leaks at intake of Eaton Vickers V-104-C-10 Water Pump?
- D
  Dustin AdamsAug 22, 2025
  To fix air leaks at the intake of your Eaton Water Pump, check the intake connection for air leaks and tighten it securely.
B
Brooke RileyAug 25, 2025
What to do if the oil level is too low in Eaton Vickers V-104-C-10 Water Pump?
- S
  Scott PerryAug 25, 2025
  If the oil level is too low in your Eaton Water Pump, ensure that the fluid level is above the intake opening in the intake pipe.
J
james32Aug 27, 2025
How to fix Eaton Vickers V-104-C-10 driven in wrong direction?
- L
  Lauren OliverAug 28, 2025
  If the Eaton Water Pump is driven in the wrong direction of rotation, it must be reversed immediately to prevent seizure. Check the direction of drive rotation against the proper pump rotation as indicated by the arrow on the body.
K
Kayla StaffordAug 30, 2025
What to do if fluid intake pipe is blocked in Eaton Vickers V-104-C-10?
- V
  Vickie AndersonAug 30, 2025
  If the fluid intake pipe in your Eaton Water Pump is blocked or the oil viscosity is too heavy to pick up prime, drain the complete system. Add new fluid of proper viscosity and filter the new fluid as recommended.
C
cassandrahoweSep 2, 2025
How to test Eaton Vickers V-104-C-10 Water Pump for air leak at pump intake piping?
- T
  Thomas PerezSep 2, 2025
  To test your Eaton Water Pump for an air leak at the pump intake piping joints or pump shaft seal, pour oil on joints and around the drive shaft. Listen for a change in operation and then tighten the joints affected.
K
Kristi JacobsSep 4, 2025
How to fix coupling misalignment in Eaton Vickers V-104-C-10 Water Pump?
- S
  Stephanie OlsonSep 5, 2025
  To fix coupling misalignment in your Eaton Water Pump, re-align the shafts.
K
Kenneth HendersonSep 7, 2025
What if vane is stuck in rotor slots of Eaton Water Pump?
- T
  Todd DickersonSep 7, 2025
  If a vane or vanes are stuck in the rotor slots of your Eaton Water Pump, inspect the rotor slots for wedged chips or foreign particles and replace all damaged parts. Flush the complete system thoroughly by recommended processes and fill the system with new, clean hydraulic fluid.
K
Kimberly NelsonSep 10, 2025
How to fix defective bearing in Eaton Vickers V-104-C-10?
- W
  William OconnorSep 10, 2025
  To fix a defective bearing in your Eaton Water Pump, disassemble the pump and replace the bearing.

Eaton Vickers V-104-C-10 Specifications

General

Brand	Eaton
Model	Vickers V-104-C-10
Category	Water Pump
Language	English

Summary

Section I Operating Characteristics

Single Pump Series Single Stage

Performance data for single stage single vane pumps, including delivery and horsepower.

Double Pump Series Single Stage Small Series Combination

Performance data for double stage small series pumps, including delivery and horsepower.

Double Pump Series Single Stage Intermediate and Small Series Combination

Performance data for double stage intermediate and small series pumps.

Double Pump Series Single Stage Large and Small Series Combination

Performance data for double stage large and small series pumps.

Section II Description

Section III Principles of Operation

A Operation

Details the pumping mechanism using cartridges, rotor, and vanes.

B Lubrication

Details lubrication requirements for older pump designs.

C Routine Inspection and Maintenance

Lists routine checks for leaks, fluid level, filters, and breathers.

Section IV Overhaul

A General

Overview of overhaul procedures using kits.

B Disassembly

Steps and warnings for disassembling the pump.

C Reassembly

Instructions for reassembling pump components in reverse order.

D Product Life

Factors influencing product longevity and maintenance.

Section V Cartridge Assembly and Installation

A Cartridge Assembly

Explains how to assemble pump cartridge parts.

B Installation

Provides guidance on installing cartridges for right/left hand rotation.

C Head Screw Adjustment

Details the procedure for adjusting head screws during assembly.

Section VI Troubleshooting

Section VII Parts Illustration Drawings

Intermediate Series Modified Cartridge Parts

Illustrates and describes modified cartridge parts for the intermediate series.

Typical Double Pump Parts Illustration Drawing

Illustrates parts for typical double pump configurations.

Related product manuals

Eaton Vickers V-104-A-10

Eaton Vickers V-104-D-10

Eaton Vickers V-105-Y-10

Eaton Vickers V-105-D-10

Eaton Vickers V-109-EC-10

Eaton Vickers V-134-20

Eaton Vickers V-125-20

Eaton Vickers V-134-X-20

Eaton Vickers V-135-X-20

Eaton Vickers V-129-C-20

Eaton Vickers V-138X-E-20

Preview: Eaton Vickers V Series

Eaton Vickers V Series