Eaton W-VACi - Page 65

65A7355H01 November 2011 www.eaton.com
65
Shunt Closing Release (SR)
This device allows for remote closing control of the circuit breaker and can operate with both direct and
alternating current.
24 VDC / 8.9A
65A7004G01
48 VDC / 4.4A
65A7004G02
60 VDC / 4.3A
65A7004G13
110-125 VDC / 2.7A
65A7004G04
220-250 VDC / 1.5A
65A7004G06
110-120 VAC / 2.6A
65A7004G10
220-230 VAC / 1.4A
65A7004G12
Attributes
Ua (DC)
24-48-60-110-125-220-250 V
Ua (AC)
110-120-220-230 V
Operating Limits
70…110% Ua (DC)
85…110% Ua (AC)
Insulating voltage
2000 V 50/60 Hz (for 1 min.)
Charging Motor (M) (40kA and below)
This device charges the mechanism closing springs electrically. In the event of a loss of power the
mechanism closing springs can be charged manually.
24 VDC / 7.2A
65A7013G01
48 VDC / 3.6A
65A7013G02
60 VDC / 2.8A
65A7013G13
110-125 VDC / 1.7A
65A7013G04
220-250 VDC / 1.0A
65A7013G06
110-120 VAC / 1.7A
65A7013G10
220-230 VAC / 0.8A
65A7013G12
Attributes
90 Watt 0.8A
Ua (DC)
24-48-60-110-125-220-250 V
Ua (AC)
110-120-220-230 V
Operating Limits
85…110% Ua
Insulating voltage
2000 V 50/60 Hz (for 1 min.)