Need help?Do you have a question about the EBARA TH Series and is the answer not in the manual?
Details the EBARA TH Series pump's applications and provides crucial general safety instructions.
Covers package contents, handling, storage, freezing, rotation checks, and starting warnings.
Performance charts for selecting EBARA TH Series pumps at 1750 and 3500 RPM.
Detailed technical specifications for EBARA THD Series pumps, including materials and performance.
Exploded view and parts list for the frame-mounted TH Series pump.
Exploded view and parts list for the closed-coupled THD Series pump.
Guidelines for proper unit placement, foundation preparation, and shaft alignment.
Procedures for piping, grouting, alignment checks, and electrical connections for safe startup.
Step-by-step guide for priming, starting, operating the pump, and draining for freeze protection.
Procedures for pump maintenance, disassembly, and part examination.
Step-by-step instructions for assembling the THD closed-coupled pump model.
Step-by-step instructions for assembling the TH frame-mounted pump model.
Diagnosing and resolving issues with motor starting, speed, and electrical connections.
Troubleshooting common pump problems like overheating, intermittent operation, or low discharge.
General| Maximum Working Pressure | 10 bar |
|---|---|
| Protection Degree | IP55 |
| Insulation Class | F |
| Application | Industrial |
| Liquid Temperature | Up to 90°C |
| Pump Casing | Cast Iron |
| Impeller | Bronze |
| Voltage | 220-240V/380-415V |
| Speed | 1450-2900 rpm |
| Material | Cast iron, bronze, stainless steel |
| Type | Close-coupled, Single Stage, End Suction Centrifugal Pump |
To Next Page
