EBARA TH Series - Page 19

19
Rev10/2018
Operating, Installation, and Maintenance
THD Assembly Instruction (Continued)
Pump Assembly – TH Frame Mounted
Step 11

Insertthekey(item039)ontheshaft(item031).
Step 12



Installtheimpeller(item021).Locktheshaftinplace andtighten the
shaftnut(item048)withLoctite.


Step 13




Installtheback‐pull‐outassemblyinthecasing(item001).
Installthecasingbolts(item120‐2)andtightenthem.

Step 15


Attachthesupport(item696)withhexheadbolts(item120‐2)and
flatwasher(item135).
Note: Install the support (item 696) aligned with the pump casing (item
001).
