COOLY C35HD BLACKEN
37
www.eberg.eu
SLEEP function
This function is useful for the night as it gradually reduces operation of the appliance.
To set this function correctly:
• Select the cool or heat mode as described above.
• Press the button.
The appliance operates in the previously selected mode.
When you choose the sleep function, the screen will reduce the brightness.
The SLEEP function maintains the room at optimum temperature without excessive uctuations
in either temperature or humidity with silent operation. Fan speed is always at Low, while room
temperature and humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1°C(1°F) per hour in a 2 hour
period. This new temperature will be maintained for the next 6 hours. Then the appliance turn
it o.
When in HEAT mode, the selected temperature will decrease by 1°C(1°F) per hour in a 3 hour
period. This new temperature will be maintained for the next 5 hours. Then the appliance turn
it o.
The SLEEP function can be canceled at any time during operation by pressing the „Sleep”, „Mode”
or „fan speed” button.
In FAN or DRY mode, SLEEP function cannot be set.
Switch the unit of temperature
When the appliance is standby, press the button, then you can change the
unit of temperature.
For example:
Before change, in cool mode, the screen display like g1.
After change, in cool mode, the screen display like g2.
Fig. 1 Fig. 2
To Next Page
Loading...
