Eberg COOLY C35HD - Timer Programming; Programming Startup; Programming Shutdown

COOLY C35HD BLACK EN
38
www.eberg.eu
SETTING THE TIMER
This timer can be used to delay the appliance startup or shutdown, this avoids wasting
electricity by optimising operating periods.
Programming start up:
• Turn on the appliance, choose the mode you want, for example cool,
24°C, high fan speed. Turn o the appliance.
• Press the button, the screen will display 1-24 hours, and the symbol
and symbol and symbol are ash together.(g 3)
• Press several times until the corresponding time is displayed. Wait
about 5 seconds, the timer will be active, then only the symbol is
displayed on screen.(g 4)
• Press again the button or the button, the timer will be canceled,
and the symbol will disappear from screen.
• Programming shut down
• When the appliance is running, press the button, the screen will display hours, and several
symbols are ash together. (g 5)
• Press several times until the corresponding time is displayed. Wait about 5 seconds, the timer
will be active. then only the symbol is displayed on screen.(g 6)
• Press again the button or the button, the timer will be canceled, and the symbol will
disappear from screen.
Fig. 5 Fig. 6 Fig. 7