Ebyte 8DO - Software Address Setup (Offset)

Chengdu Ebyte Electronic Technology Co.,Ltd. 【8DO】MA01 -XXCX0080 User Manual
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
17
After you change the address, you need to power down restart before the new address set is effective.
4.2.3 Software address (offset address).
Software address: Users can make different settings depending on the scene. The software address setting range is 1
to2 24(device address: 1 to 247), and the software address defaults to 1.
After you change the address, you need to power down restart before the new address set is effective.
Changing the software address is done through the configuration tool software, as shown in the figure:
Figure 4-2-7 Software Address (Offset Address)