Chengdu Ebyte Electronic Technology Co.,Ltd. 【8DO】MA01 -XXCX0080 User Manual
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
(3) DO-related
Set the DO function, set the operating mode (level mode, pulse mode, follow mode), set the pulse width (pulse
mode only),power up theDO state (on, off), follow the source (follow the setting DIx).
Note: Multiple switch output DO ends can be set to follow one DI input, not one switch output DO side to follow
multiple DI inputs. Follow mode is limited to DI-enabled devices
Figure 6-2-11 "DO-related" interface
6.2.3 Advanced Settings Interface
Figure 6-2-12 Advanced Settings Interface
(1)Device settings
Advanced setup interface, support for device name settings, offset address (software address), read parameters, turn
on write protection, turn off write protection, restart modules, restore factory settings.
Figure 6-2-13 Device Settings Interface
To Next Page
Loading...
