Need help?Do you have a question about the Ebyte NB114 and is the answer not in the manual?
Lists necessary hardware and software for setting up the device.
Provides instructions on connecting the device's power supply and serial communication interfaces.
Details necessary network and computer configurations for testing and initial setup.
Overview of product models, types, connection capabilities, operating modes, voltage, and physical dimensions.
Lists detailed technical data including operating voltage, interfaces, network protocols, and environmental limits.
Explains the function of each LED indicator and physical interface port on the device.
Illustrates the physical dimensions and mounting hole specifications of the device.
Describes the recommended method for physically installing the device, utilizing its mounting holes.
Configures IP address settings (Static/DHCP), DNS resolution, and intranet access port for network connectivity.
Details various operational modes including TCP/UDP Client/Server, HTTP, and MQTT for data communication.
Explains configuration of baud rate, data bits, check bits, and stop bits.
Covers disconnection, timeout restart, short connection, cache, heartbeat, and registration package settings.
Explains Modbus gateway modes: protocol conversion, multi-host, storage, configurable, and automatic upload.
Guides on web page configuration, factory reset, AT commands, and software utilities for device management.
To Next Page
General
