Ebyte E104-BT11 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT11 User Manual
Copyright ©2012–2020，Chengdu Ebyte Electronic Technology Co.,Ltd
14
Operation
code
Parameter
Request
0x00
Configure 16 byte of NetKey data
Response
0x00
Return 16 byte of configured NetKey data
For example,
Request
12 C0 00 11223344556677889900112233445566
Response
12 40 00 11223344556677889900112233445566
Remark
1. This directive only applies to BT11-G;
2. The instruction does not support repeated settings;
3. Effective immediately, save after power off.
5.4.1.2 Read NetKey
Operation
code
Parameter
Request
0x01
N/A
Response
0x01
Return 16 byte of configured NetKey data
For example,
Request
02 C0 01
Response
12 40 01 11223344556677889900112233445566
Remark
1. This command reads the NetKey that has been set;
2. This instruction is only for BT11-G.
5.4.1.3 AppKey configuration
Operation
code
Parameter
Request
0x02
Configure 16 byte of AppKey data
Response
0x02
Return 16 byte of configured AppKey data
For example,
Request
12 C0 02 11223344556677889900112233445566
Response
12 40 02 11223344556677889900112233445566
Remark
1. This directive only applies to BT11-G;
2. This command can only be used after adding Netkey, and only supports configuring one APPkey.
5.4.1.4 AppKey read
Operation
code
Parameter
Request
0x03
Configure 16 byte of AppKey data
Response
0x03
Return 16 byte of configured AppKey data
For example,
Request
02 C0 03
Response
12 40 03 11223344556677889900112233445566
Remark
1. This directive is only applicable to BT11-G;
2. This command reads the AppKey that has been set.

Ebyte E104-BT11 Specifications

General

Brand	Ebyte
Model	E104-BT11
Category	Control Unit
Language	English