EasyManua.ls Logo

Ebyte E22-400M22S - 1 Overview; Introduction; Features

Ebyte E22-400M22S
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chengdu Ebyte Electronic Technology Co., Ltd. E22-400M22S User manual
Copyright ©2012–2018,Chengdu Ebyte Electronic Technology Co.,Ltd.
2
1. Overview
1.1 Introduction
The E22-400M22S is based on the SX1268, a new generation of
LoRa
TM
RF chip manufactured by Semtech, USA. It is an ultra-small and
self-developed 433MHz, 470MHz SMD LoRa
TM
wireless module.
Because it adopted the original SX1268 as main core, so the
anti-interference performance and communication distance have been further improved compared to the previous
generation LoRa
TM
transceiver.Due to its new LoRa
TM
modulation technology, the anti-interference performance and
communication distance are far superior to the current FSK and GFSK modulation products. This module is mainly for
smart home, wireless meter reading, scientific and medical research, and long distance wireless communication
equipment. The RF performance and components selection are all in accordance with industrial-grade standards and this
products obtained FCC, CE and RoHS certification already and so users do not need to worry about the performance.
Adopted industrial grade high precision 32MHz crystal, the product can cover an ultra-wide frequency range of
410~493MHz and is backward compatible with SX1278 and SX1276.
Since the module is a RF transceiver module only, users need to use the MCU driver or use a dedicated SPI debug tool.
1.2 Features
Communication distance tested is up to 7km
Maximum transmission power of 160mW, software multi-level adjustable
Support the global license-free ISM 433MHz/470MHz band
Support air date rate of 0.018-62.5kbps in the LoRa
TM
mode
Support 300kpbs in the FSK mode;
Compared with the transceiver of SX1278/SX1276;
With large capacity, FIFO supports 256Byte data cache.;
New SF5 spreading factor to support dense networks;
Support 2.5V~3.7V power supply, more than 3.3V power supply can guarantee the best performance;
Industrial grade standard design, support -40 ~ 85 °C for working over a long time
IPEX and stamp hole optional, good for secondary development and integration.

Related product manuals