Ebyte E49-900M20S - Chapter 1 Introduction; 1.1 Brief introduction; 1.2 Features; 1.3 Application

Chengdu Ebyte Electronic Technology Co.,Ltd. E49-900M20S user manual
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
3
Chapter 1 Introduction
1.1 Brief introduction
E49-900M20S is a cost-effective wireless data transmission
module launched by Chengdu Ebyte. It is A pure hardware module based
on CMT2300A.
E49-900M20S Supports the maximum transmission power of
20dBm, users can set a lower output power , thus saving power
consumption.The module works in the 850MHz ~ 930MHz frequency
band, including the commonly used 868MHz and 915MHz frequency
band.
Since this module is a pure RF transceiver module, using SPI
interface, needs MCU driver.
1.2 Features
 The measured communication distance can reach 2.5km；
 Maximum transmission power of 20dBm，software multi-level adjustable；
 Supports ISM 868MHz/915MHz band；
 Supports 0.5Kbps～300Kbps transmission rate；
 Supports low power mode, suitable for battery；
 Supports GFSK modulation mode, OOK & (G)MSK；
 Supports 2.6V～3.6V power supply；
 Industrial grade standard design, support -40 ~ 85 °C for working over a long time；
 IPEX and stamp hole optional，good for secondary development and integration.
1.3 Application
 Smart home and industrial sensors;
 Security, positioning system;
 Wireless remote control, UAV;
 Wireless game remote control;
 Healthcare products;
 Wireless voice, wireless headset;
 Car industry.