Ebyte E810-DTU - Page 47

Chengdu Ebyte Electronic Technology Co,.Ltd E810-DTU User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co,.Ltd
44
mode
EMBMAC adds 6 bytes of MAC as the registered packet data before each packet is sent to the server.
EMBCSTM adds custom registration package data to each packet sent to the server.
OLMAC only sends a 6-byte MAC registration package the first time it links to the server.
OLCSTM only sends a user-defined registration package the first time it is linked to the server.
OFF disable registration package mechanism.
Example: AT+ REGMODA1= EMBMAC<cr>
7.4.17 AT+REGMODB1: query/set the serial port corresponding to the registered package mode of
SOCKET B1
Function: query/set serial port corresponding to SOCKET B1 registered package mode.
Format: query
Send: AT + REGMODB1 < CR >
Return: <cr><lf>+OK=< mode ><cr><lf>
Set up the
Send: AT+ REGMODB1 =< mode ><cr>
Returns: < CR > < LF > + OK < CR > < LF >
Parameters:
mode
EMBMAC adds 6 bytes of MAC as the registered packet data before each packet is sent to the server.
EMBCSTM adds custom registration package data to each packet sent to the server.
OLMAC only sends a 6-byte MAC registration package the first time it links to the server.
OLCSTM only sends a user-defined registration package the first time it is linked to the server.
OFF disable registration package mechanism.
Example: AT+ REGMODB1= OLCSTM<cr>
7.4.18 AT+REGDATA1: query/set the serial port corresponding to the registered package contents of
SOCKET A1
Function: query/set serial port corresponding to SOCKET A1 registered package content.
Format: query
Send: AT+ REGDATA1<cr>
Return: <cr><lf>+OK=< data,code ><cr><lf>
Set up the
Send: AT+ REGDATA1 =< data,code ><cr>
Returns: < CR > < LF > + OK < CR > < LF >
Parameters:
The registered package contents of ASCII code or hexadecimal data within 40 bytes of data.
Code ASCII or HEX
Example: AT+ REGDATA1=EBYTE,ASCII<cr>
7.4.19 AT+REGDATB1: query/set the serial port corresponding to the registered package contents of
SOCKET B1
Function: query/set serial port corresponding to SOCKET B1 registered package content.