Chengdu Ebyte Electronic Technology Co., Ltd. E870-E1_User Manual_EN
Copyright ©2012
–
2022,
Chengdu Ebyte Electronic Technology Co., Ltd.
5
Chapter 2 Quick Use
[Note] This experiment needs to be carried out with the default factory parameters.
The following two methods are provided for quick access to the server, one is to access the Ebyte cloud platform by
factory settings, and the other is to access the self-built server through the host computer configuration.
2.1 Devices Preparation
The following table shows the materials required for this test:
One computer, one E870-E1 (hereinafter referred to as "device"), one network cable, USB to RS485 converter, and
several wires;
The most important thing is to need a routing environment that can access the Internet, otherwise the Ebyte cloud
control device cannot be used;
To Next Page
Loading...
