Ebyte E870-E1

Chengdu Ebyte Electronic Technology Co., Ltd. E870-E1_User Manual_EN
Copyright ©2012
–
2022,
Chengdu Ebyte Electronic Technology Co., Ltd.
7
⑤The E870-E1 model created before "Device Model" select, then enter the SN code on the back of the device, fill
in other parameters according to your own needs, and click "OK to add" to create the device.
⑥Restart the device, and when the STATE light of the device is always on, you can see that the device is online on
the platform.
⑦Click "Device Operation and Maintenance", "Online Debugging" on the platform, and click "Debug" behind the
device to enter the device debugging interface. Enter the corresponding command to control the device.