What to do if LCD display is dim on ECD Data Loggers?
If the LCD display on your ECD Data Logger is dim or not lighting up, the first thing to check is the battery. It might be discharged. If it is, replace it with a SAFT lithium battery (LS 1425) or the equivalent specified to resolve the issue.
General| Accuracy | ±0.5 °C |
|---|---|
| Communication Interface | USB |
| Temperature Range | -40°C to 85°C |
| Resolution | 0.1°C |
| Battery Life | 1 year (typical) |
Configure the M.O.L.E. Profiler to communicate with the M.O.L.E. MAP Software and install necessary device drivers.
Choose the correct M.O.L.E. instrument from the software and scan for connected devices if necessary.
Define the instrument's name, set the recording interval, and enable/disable sensors for data logging.
Input assembly details like part number, dimensions, and sensor locations for context in data analysis.
Confirm the instrument's operational status, including battery, temperature, and firmware, before starting data collection.
Diagnose issues by categorizing problems as hardware, communication, or software related for effective troubleshooting.
Reach out to ECD support for assistance, providing essential product and software information for efficient problem-solving.
To Next Page