When using a Reverse Osmosis filter prior to the machine, you will need to
verify the R.O. storage tank pressure is 11-13psi.
You will also need to remineralize the water to have at least 100TDS in the
water for optimum performance.
You can purchase a TDS meter inexpensively.
Installation Precautions
Caution
19
Accessories
pH test kit
Water Spout
Stainless Steel
Acid Outlet
AC cord Fitting spanner Elbow Teflon tape
1/4 in.Water
Source Hose(250cm)
Color chart
Manual
Manual Dust Pre-Filter
Diverter Valve
1/4 in.Water
Outlet Hose(120cm)
To Next Page
Loading...