Echo CS-303T User Manual

OPERATION CS-303T
34 X7503209108
© 10/20 ECHO Incorporated
7. Press Throttle Trigger Lockout
(D) down while grasping
Throttle Trigger (E) and then
push in Throttle Latch (F) as
shown.
8. Securely hold the chain saw as
shown. When starting the chain
saw place the unit on flat
ground and hold the front
handle with left hand and hold
firmly the rear end of rear
handle with right knee. Pull
starter handle with right hand
several times until first firing
sound.
9. Push Choke Control Knob (C)
all the way in to (OPEN
choke position).
10. Pull starter handle to start the
engine.
Note: Do not pull starter rope out
to maximum position. Do
not allow recoil handle to
snap back against the
casing. If engine does not
start after 5 pulls, repeat
instructions.
D
E
F
C

Echo CS-303T Specifications

General

Engine Displacement	30.1 cc
Fuel Capacity	0.21 US quarts
Oil Capacity	0.16 US quarts
Guide Bar Length	12 inches
Power Source	Gas
Fuel Tank Capacity	260 ml
Oil Tank Capacity	0.16 US quarts
Weight (without bar and chain)	3.9 kg
Chain Pitch	3/8 in.
Chain Gauge	0.050 in.