Echo CS-303T

DESCRIPTION CS-303T
22 X7503209108
© 10/20 ECHO Incorporated
Preparation For Use
Saw Chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar, and saw chain
separated. Install guide bar, saw chain, and optional Kick
Guard
TM
as follows.
Instructions to Install Optional Kick Guard
TM
to Bar
Tool Needed: Two 11 mm (7/16 in.)
Wrenches.
1. Install bolt (A) in rear hole (B) of
Kick Guard
TM
and through front
hole (C) in guide bar.
2. IMPORTANT:
Dimple (D) in
Kick Guard
TM
must engage
recess (E) in guide bar.
3. Securely tighten nut (F) and
bolt (A).
A
D
B
E
C
F
Optional
Kick Guard
TM