CS-310 DESCRIPTION
X7503275401 21
© 02/2019 ECHO Inc.
CHAIN SAW TERMS
1. FAST IDLE - Throttle setting that causes engine to operate at a faster
speed for easier starting.
2. THROTTLE LATCH - Device that sets idle speed to fast idle when
choke control is operated.
3. CHAIN BRAKE - Stops the saw chain.
4. DRIVE SPROCKET - Drives saw chain.
5. CLUTCH - Turns drive sprocket when engine rpm is fast enough to
provide the power needed for cutting.
1. Chain Brake Lever/Front Hand Guard
2. Spark Arrestor Muffler Or Spark Arrestor Muffler With Catalyst
3. Tip Guard
4. Saw Chain
5. Guide Bar
6. Chain Catcher
7. Chain Tension Adjuster
8. Chain Brake/sprocket Guard
9. Rear Hand Guard
10. Purge Pump
11. Choke Control Knob
12. Cylinder Cover
13. Spark Plug
14. Throttle Trigger Lockout
15. Rear Handle - For The Right Hand
16. Throttle Trigger
17. Ignition Switch
18. Fuel Tank Cap
19. Cylinder Cover Latch
20. Starter Handle
21. Front Handle - For The Left Hand
22. Oil Tank Cap
To Next Page
Loading...
Need help?
General
