EasyManuals Logo

Echo CS-310 User Manual

Echo CS-310
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
CS-310 MAINTENANCE
X7503275401 47
© 02/2019 ECHO Inc.
Some tree sap and resins are corrosive. Thoroughly wash the guide
bar and sprocket areas after each use, then coat metal parts with light
oil.
Cooling System Cleaning
Check periodically.
Clogged fins will result in poor
engine cooling.
1. Remove cylinder cover and
starter.
2. Use compressed air or wooden
tool to remove dirt and dust from
between fins to let cooling air
pass easily.
Spark Arrestor Muffler
The spark arrestor muffler controls the exhaust noise and prevents hot,
glowing particles of carbon from leaving the muffler.
Make sure the spark arrestor screen is in good repair and properly seated
in the muffler.
Certain internal combustion engines operated on forest, brush, and/or
grass-covered areas in the states of Washington, Oregon, Idaho,
California, Minnesota, New Jersey and Maine, are required to be
equipped with a spark arrestor.
This requirement also applies to all U.S. Forest Service lands. In some of
these areas, the spark arrestor system must be certified per USDA Forest
Service Regulation SAE J335.
Check with your local or state authorities for specific regulations in your
area. Failure to follow these requirements is a violation of the law.
Cylinder fins

Other manuals for Echo CS-310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo CS-310 and is the answer not in the manual?

Echo CS-310 Specifications

General IconGeneral
Engine Displacement30.5 cc
Bar Length14 inches
Weight8.8 lbs
Chain Pitch3/8 inch
Chain Gauge0.050 inch

Related product manuals