CS-350WES
5
SERVICE INFORMATION
1-5 Service Limits
mm (in)
A Cylinder bore When plating is worn and aluminium can be seen
B Piston outer diameter Min. 38.91 (1.532)
C Piston pin bore Max. 8.03 (0.316)
D Piston ring groove Max. 1.6 (0.063)
E Piston ring side clearance Max. 0.1 (0.004)
F Piston pin outer diameter Min. 7.98 (0.314)
G Piston ring width Min. 1.45 (0.057)
H Piston ring end gap Max. 0.5 (0.02)
K Con-rod small end bore Max. 11.03 (0.434)
L Crankshaft runout Max. 0.05 (0.002)
M Sprocket bore Max. 13.07 (0.515)
N Clutch drum bore Max. 61.5 (2.42)
P Sprocket wear limit Max. 0.5 (0.02)
5K173
5K260
5K256
5K174 5K190
5K016 5K042
5K257 5K258
5K191
5K259
5K261
ABCD
FGH
KLMP
N
To Next Page
Loading...
