CS-4510 SAFETY
X7503350603 11
© 06/2019 ECHO Incorporated.
20. When using a chain saw a fire extinguisher should be available.
21. When felling, keep at least 2 tree lengths between yourself and your
fellow workers
22. Follow instructions in your operator’s manual for starting the chain saw.
23. Never adjust the guide bar or saw chain when the engine operating.
24. When boring with the chain saw, the initial cut should be introduced
with the lower part of the nose (tip) until the hole is sufficiently large so
as to introduce the entire nose (tip) of the guide bar. This technique
should reduce the danger of kickback.
25. Allow your chain saw to cool before refueling, and do not smoke while
refueling.
Chain saws shall be used in accordance with the operating
instructions and safety precautions listed in the operator's
manual(s). It shall be the responsibility of the owner to see that
such instructions and precautions are given to every operator
who uses the saw.
◆ During operation, the muffler or catalytic muffler and
surrounding cover become hot.
◆ Never suspend the saw on a lanyard with the engine
running.
◆ Always use the saw from the right-hand side of your body –
NEVER from the left side.
◆ Always wear proper safety clothing to protect your lower
body from sharp saw chain and hot muffler.
◆ Always keep exhaust area clear of flammable debris during
transportation or when storing, otherwise serious property
damage or personal injury may result.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
◆ ALWAYS stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop before
removing obstructions, clearing debris, or servicing unit.
◆ DO NOT start or operate unit unless all guards and
protective covers are properly assembled to unit.
To Next Page
Loading...
Need help?
General