CS-4510 OPERATION
X7503350603 33
© 06/2019 ECHO Incorporated.
Checking Chain Tension
Chain tension should be checked
frequently during work and corrected
as necessary.
Do not operate with a loose chain.
Chain Lubrication Test
Hold the chain just above a dry surface
and open the throttle to half speed for 30
seconds.
A thin line of “thrown” oil should be seen
on the dry surface.
Cutting Instructions
General
◆ This chain saw is designed for cutting wood. Do not cut
metal, plastic or any non-wood material.
◆ Wear suitable hearing
protection such as
earmuffs or earplugs to
protect against
objectionable or
uncomfortable loud noises.
Shown with optional
Kick Guard
TM
Shown with optional
Kick Guard
TM
To Next Page
Loading...
