CS-4510 MAINTENANCE
X7503350603 39
© 06/2019 ECHO Incorporated.
• Hard nose guide bars of the same length and nose radius as a sprocket
nose bar.
Saw Chain
(Low-kickback)
Do not use replacement saw chain unless it has been
designated as meeting ANSI B175.1 or CSA Z62.1, .3 kickback
performance requirements, when tested on the representative
sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1
or CSA Z62.1, .3.
Note: LOW KICKBACK SAW CHAIN meets the kickback
performance requirements of ANSI B175.1 or CSA Z62.1, .3
(safety requirements for gasoline-powered chain saws).
MAINTENANCE
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit. Allow unit to
cool before performing service. Wear gloves to protect hands
from sharp edges and hot surfaces.
Operating a poorly maintained unit can result in serious injuries
to operator or bystanders. Always follow all maintenance
instructions as written, otherwise serious personal injury may
result.
Your unit is designed to provide many hours of trouble free service. Regular
scheduled maintenance will help your unit achieve that goal. If you are
unsure or are not equipped with the necessary tools, we recommend that
you take your unit to a Servicing Dealer for maintenance. To help you decide
whether you want to DO-IT-YOURSELF or have the Dealer do it, each
maintenance task has been graded. If the task is not listed, see your Dealer
for repairs.
To Next Page
Loading...
Need help?
General