EasyManua.ls Logo

Echo Grass Trimmer/Brush Cutter SRM-280 User Manual

Echo Grass Trimmer/Brush Cutter SRM-280
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
Grass Trimmer/Brush Cutter
Operator's Manual
MODELS SRM-280
SRM-280S
X750231022
X750010822
12/09
Question and Answer IconNeed help?

Do you have a question about the Echo Grass Trimmer/Brush Cutter SRM-280 and is the answer not in the manual?

Echo Grass Trimmer/Brush Cutter SRM-280 Specifications

General IconGeneral
BrandEcho
ModelGrass Trimmer/Brush Cutter SRM-280
CategoryTrimmer
LanguageEnglish

Summary

Introduction

The Operator's Manual

Guidance on using the operator's manual for safe operation and future reference.

The Safety Manual

Guidance on understanding hazards and safety measures for safe use.

Safety

Manual Safety Symbols and Important Information

Explanation of safety alert symbols, key words, and their meanings.

International Symbols

Description of international safety symbols used on the product.

Personal Condition and Safety Equipment

Guidelines on operator's physical condition and required safety gear.

Physical Condition and Preparedness

Operator Physical Condition

Advice on operating the unit only when physically and mentally fit.

Personal Protective Equipment

Recommendations for eye, hand, hearing protection, and proper clothing.

Environmental and Operational Precautions

Guidance for hot weather and extended operation to prevent injury.

Repetitive Stress Injuries

Risk Reduction for RSI/CTS

Tips to reduce the risk of Repetitive Stress Injury and Carpal Tunnel Syndrome.

Safe Operation Practices

Key practices for safe operation, including clearing the area and maintaining grip.

Equipment

Equipment Safety Warnings

Critical warnings regarding equipment use, moving parts, and fuel system integrity.

Emission Control Information

Details on EPA and C.A.R.B. emission control systems for the engine and fuel tank.

Product Description

Safety Decals Identification

Locating and understanding safety decals on the unit.

Key Components

Power Head and Controls

Identification of engine, grips, throttle, and stop switch.

Drive System Components

Identification of drive shaft, cutter head, shield, and related parts.

Fuel and Ignition System Components

Identification of fuel tank, air cleaner, spark plug, and choke.

Assembly

Plastic Shield Installation

Step-by-step guide for installing the plastic debris shield.

Nylon Line Head Installation and Replacement

Instructions for installing, advancing, and replacing trimmer line.

Front Handle Installation

Procedure for positioning and securing the front handle.

Operation

General Operation Warnings

Essential warnings for safe operation concerning moving parts and exhaust.

Operation with Blades

Instructions for preparing the unit for various types of cutting blades.

Choosing the Correct Blade

Guidance on selecting appropriate blades for different cutting tasks.

Fuel Management

Fuel Requirements and Type

Specifications for approved gasoline and two-stroke oil, and prohibited fuels.

Safe Fuel Handling and Mixing

Procedures for safely mixing, storing, and handling fuel.

Engine Starting and Stopping

Starting Cold Engine Procedure

Detailed steps for starting a cold engine.

Starting Warm Engine Procedure

Steps for starting the engine when it is already warm.

Stopping Engine Procedure

Instructions for safely shutting down the engine.

Maintenance

Skill Levels for Maintenance

Explanation of maintenance skill levels required for various tasks.

Maintenance Intervals and Procedures

Schedule and codes for routine maintenance tasks.

Air Filter and Fuel Filter Maintenance

Procedures for cleaning/replacing air and fuel filters.

Spark Plug and Cooling System Maintenance

Steps for maintaining the spark plug and cooling system.

Exhaust System Maintenance

Spark Arrestor Screen Cleaning

Procedure for cleaning the spark arrestor screen.

Exhaust Port Cleaning

Instructions for cleaning carbon deposits from the exhaust port.

Carburetor Adjustment

Engine Break-In and Idle Speed Adjustment

Guidance on engine break-in and adjusting idle speed.

High Altitude Operation Considerations

Information on carburetor adjustments for high altitude use.

Lubrication

Gear Housing Lubrication

Procedure for checking and adding grease to the gear housing.

Drive Shaft Lubrication

Instructions for lubricating the drive shaft's flexible cable.

Nylon Line Replacement

Echomatic Pro Trimmer Head Line Loading

Step-by-step guide for loading trimmer line into the head.

Sharpening Metal Blades

Blade Inspection and Sharpening Techniques

Procedures for inspecting and sharpening metal blades.

Troubleshooting

Engine Problem Troubleshooting Chart

A guide to diagnose and remedy common engine problems.

Storage

Long Term Storage Procedures

Steps for preparing the unit for storage exceeding 30 days.

Specifications

Model Specifications Table

Technical specifications for SRM-280 and SRM-280S models.

Warranty Statements

ECHO's and Owner's Responsibilities

Outline of warranty coverage responsibilities for both ECHO and the owner.

Product Warranty Periods and Exceptions

Details on warranty duration for different applications and exceptions.

Parts, Accessories, and Warranty Exclusions

Information on warranted parts, accessories, and coverage limitations.

Emission Control Warranty

Specific warranty coverage for emission control system components.

Servicing Information

Parts Identification and Serial Number

How to identify parts and locate the unit's serial number.

Service, Support, and Registration

Information on authorized service, consumer support, and warranty registration.

Manuals and Safety Videos

How to obtain additional manuals and safety videos.

Related product manuals