EasyManua.ls Logo

Echo GT-251E - Specifications

Echo GT-251E
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
MODEL -----------------------------------------------------GT-251E
Length-------------------------------------------------------1,510 mm (59.4 in.)
Width--------------------------------------------------------315 mm (12.4 in.)
Height ------------------------------------------------------- 545 mm (21.5 in.)
Weight (dry) w/Cutter Head (GT251E) ----------------- 4.77 kg (10.5 lb.)
Engine Type ------------------------------------------------Air cooled, two-stroke, single cylinder gasoline engine
Bore ----------------------------------------------------------34.0 mm (1.34 in.)
Stroke-------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement -----------------------------------------------25.4 cc (1.55 cu. in.)
Exhaust (GT-251E) -----------------------------------------Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama diaphragm w/purge
Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge ignition
Spark Plug --------------------------------------------------NGK BPMR-8Y 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.40 lit. (13.5 US fl. oz.)
Recoil Starter System --------------------------------------i-30 Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) Flex Shaft
Rotating Direction ----------------------------------------- Clockwise viewed from top
Cutter Head -------------------------------------------------Rapid Loader
TM
2-line Head with .080 in. (12 pieces)
Handle ------------------------------------------------------- Left - D-Loop, Right - Grip
Shoulder Harness ------------------------------------------ Optional 99944200201
Idle Speed (RPM) ------------------------------------------ 2,500 - 3,000
Wide Open Throttle Speed with
Trimmer Head (RPM) -------------------------------------- 7,300 - 9,300
SPECIFICATIONS
IMPORTANT
This spark ignition system complies with Canadian ICES-002

Related product manuals