PB-2620 MAINTENANCE
X7501190602 27
© 10/2017 ECHO Inc.
4. Control engine speed with
throttle trigger (A), or for
continuous use, set engine
speed with throttle position
lever (B). Rotate throttle
position lever forward for lower
speed, back for higher speed.
5. Use lower speed to blow debris
from hard surfaces.
6. Additional speed may be
necessary to clean debris,
snow, etc. from lawns and
flowerbeds.
Note: Never use a higher speed
setting than necessary to perform a task. Remember, the
higher the engine speed, the louder the blower noise.
Minimize dust by using blower at lower speeds. Keep debris
on your property. Be Smart - be a good neighbor.
MAINTENANCE
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit. Allow unit to
cool before performing service. Wear gloves to protect hands
from sharp edges and hot surfaces.
Operating a poorly maintained unit can result in serious injuries
to operator or bystanders. Always follow all maintenance
instructions as written, otherwise serious personal injury may
result.
To Next Page
Loading...
Need help?
General
