Echo PB-8010 H User Manual

MAINTENANCE PB-8010 H/T
42 X7501200001
© 11/2018 ECHO Inc.
2. Complete warm up by running at full throttle for 5 minutes, operating
choke twice to clear air from carburetor chambers.
3. Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
“Specifications” Page of this
manual. Turn idle screw (A)
clockwise to increase idle
speed; counter clockwise to
decrease idle speed.
A
A

Echo PB-8010 H Specifications

General

Brand	Echo
Model	PB-8010 H
Category	Blower
Language	English