Echo PB-8010T User Manual

MAINTENANCE PB-8010 H/T
40 X7501200001
© 11/2018 ECHO Inc.
6. Connect spark plug lead.
Exhaust Port Cleaning
Level 2.
1. Remove spark plug lead from
spark plug, and remove engine
cover.
2. Place piston at top dead center.
Remove muffler (A) and muffler
gasket (B).
3. Use a wood or plastic scraping
tool to clean deposits from
cylinder exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do
not scratch the cylinder or piston when cleaning the exhaust port. Do
not allow carbon particles to enter the cylinder.
4. Inspect muffler gasket, and replace if damaged.
5. Install muffler gasket and muffler.
6. Tighten muffler mounting bolts (or nuts) to 110-150 kgf•cm
(95-130 in•lbf).
Parts Required: As needed: Muffler Gasket
A
B

Echo PB-8010T Specifications

General

Brand	Echo
Model	PB-8010T
Category	Blower
Language	English