Echo PB-8010T User Manual

PB-8010 H/T MAINTENANCE
X7501200001 39
© 11/2018 ECHO Inc.
Removal of cooling passage blockages or cleaning of cooling fins is
considered “Normal Maintenance.” Any failure attributed to lack of
maintenance is not warranted.
Cleaning Grill
1. Brush accumulated debris from intake grill between backpack frame
and blower housing.
Cleaning Cylinder Fins
1. Disconnect spark plug lead
from spark plug.
2. Remove engine cover.
3. Clean cylinder fins (A) to allow
cooling air to pass freely.
4. Install engine cover.
5. Connect spark plug lead.
Exhaust System
Spark Arrestor Screen
Level 2.
Carbon deposits in muffler will cause a drop in engine output and
overheating. Spark arrestor screen must be checked periodically.
1. Disconnect spark plug lead
from spark plug.
2. Remove engine cover.
3. Remove spark arrestor screen
(C) from muffler. Replace
screen if plugged with carbon
deposits.
Note: When cleaning carbon
deposits, be careful not to
damage the catalytic
element inside muffler.
4. Install spark arrestor screen.
5. Install engine cover.
Parts Required: Spark Arrestor Screen
A
A
C

Echo PB-8010T Specifications

General

Brand	Echo
Model	PB-8010T
Category	Blower
Language	English