10 X7722274905
© 11/2015 ECHO Inc.
EMISSION CONTROL (EXHAUST & EVAPORATIVE) PAS-225
EMISSION CONTROL (EXHAUST & EVAPORATIVE)
CARB And EPA Emissions Control Information
The emission control system for the engine is EM (engine modification)
and, if the second to last character of the Engine Family on the Emission
Control Information label (sample below) is “B”, “C”, “K”, or “T”, the
emission control system is EM and TWC (3-way catalyst). The fuel
tank/fuel line emission control system is EVAP (evaporative emissions).
Evaporative emissions for California models are only applicable to fuel
tanks.
An Emission Control Label is located on the engine. (This is an
EXAMPLE ONLY, information on label varies by engine FAMILY).
Product Emission Durability (Emission Compliance Period)
The 50 or 300 hour emission compliance period is the time span
selected by the manufacturer certifying the engine emissions output
meets applicable emissions regulations, provided that approved
maintenance procedures are followed as listed in the Maintenance Section of this manual.
To Next Page
Loading...
Need help?
General
