Echo PAS-225 Value Pack User Manual

Pro Attachment Series
TM
Operator's Manual
MODEL PAS-225 Value Pack
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Oper-
ator's Manual with this unit and a separate Operator's Manual and Safety Manual
(if available) with the attachment. All manuals must be read and understood for
proper and safe operation. Failure to do so could result in serious injury.
X7722273901
X772000381
02/10

Echo PAS-225 Value Pack Specifications

General

Engine Displacement	21.2 cc
Engine Type	2-stroke
Starting System	i-30™ starting system
Shaft Type	Straight
Cutting Swath	17 in (43 cm)

Summary

SAFETY

Manual Safety Symbols and Important Information

Explains safety alert symbols and keywords used in the manual for user understanding.

International Symbols

Lists and describes various international safety symbols found on the product.

PERSONAL CONDITION AND SAFETY EQUIPMENT

Physical Fitness and Safety Equipment

Discusses physical condition, proper clothing, eye, and hearing protection for safe operation.

Extended Operation Precautions

Offers precautions for prolonged use, vibration exposure, and hot humid weather.

Repetitive Stress Injury Prevention

Avoiding RSI/CTS

Advice on proper posture, breaks, and exercises to prevent repetitive stress injuries.

OPERATING SAFETY GUIDELINES

Work Area, Grip, and Stance

Covers clearing the work area, proper grip, and maintaining a stable stance.

Hot Surfaces and Warnings

Warns about hot surfaces and general operational safety practices.

EQUIPMENT AND EMISSION CONTROL

Approved Attachments and Unit Checks

Stresses using approved attachments and performing pre-operation unit checks.

Emission Control Information

Details emission control systems, compliance periods, and relevant labels.

UNIT DESCRIPTION

Safety Decals and Components

Identifies safety decals and key unit components for user recognition.

COMPONENT DESCRIPTIONS

Power Head to Drive Shaft Parts

Describes components from the power head through the drive shaft assemblies.

Cutting Attachments and Controls

Details parts related to cutting attachments, controls, and engine features.

ASSEMBLY PROCEDURES

Power Head Shaft/Lower Shaft Assembly

Provides sequential steps for connecting the power head and lower shaft.

ASSEMBLY PROCEDURES

Drive Shaft Coupling and Shield Installation

Guides on connecting drive shafts and installing the plastic debris shield.

ASSEMBLY PROCEDURES

Nylon Line Head Installation and Removal

Instructions for installing and removing the nylon trimmer line head.

Advancing Trimmer Line

Describes the method for advancing the trimmer line during operation.

ASSEMBLY AND OPERATION

Front Handle Installation

Details how to position and secure the front handle for comfortable use.

General Operation Warnings

Critical safety warnings to be understood before operating the unit.

TRIMMER OPERATION WITH BLADES

Preparing for Blade Use

Details required parts and configurations for safe operation with blades.

TRIMMER OPERATION WITH BLADES

Choosing the Correct Blade

Guidance on selecting the appropriate blade for the material being cut.

Harness Use for Trimmers

Recommends and explains harness use for safety and reduced operator fatigue.

EDGER OPERATION

Edging Techniques and Depth Adjustment

Instructions for edging, including softening ground and adjusting blade depth.

Edging Stance and Direction

Advises on proper direction, stance, and walking surface for edging.

EDGER OPERATION AND FUEL

Edging Safety and Fuel Requirements

Safety notes for edging and details on approved fuel types and oil mixing.

FUEL HANDLING AND STORAGE

Safe Fuel Handling and Mixing

Critical safety instructions for fuel handling, mixing, and refueling procedures.

Fuel Storage Guidelines

Guidance on storing fuel for optimal use and safety, including age and separation.

ENGINE STARTING PROCEDURES

Starting a Cold Engine

Step-by-step process for starting a cold engine, including choke and purge bulb use.

ENGINE STARTING AND STOPPING

Starting a Warm Engine

Steps for starting a warm engine, noting differences from cold start procedure.

Stopping the Engine Safely

Description of how to properly shut down the engine using the stop switch.

MAINTENANCE OVERVIEW

Maintenance Skill Levels

Defines skill levels (1 and 2) for various maintenance tasks.

Maintenance Intervals Schedule

Provides a schedule for performing component maintenance tasks.

MAINTENANCE - AIR AND FUEL FILTERS

Air Filter Maintenance

Explains how to clean or replace the air filter using brush and cleaner.

Fuel Filter Maintenance

Details inspection and replacement of the fuel filter using a wire hook.

MAINTENANCE - SPARK PLUG AND COOLING SYSTEM

Spark Plug Maintenance

Guides on inspecting, cleaning, and adjusting the spark plug gap.

Cooling System Maintenance

Explains how to maintain the cooling system by cleaning fins and air intakes.

MAINTENANCE - EXHAUST SYSTEM

Spark Arrestor Screen Maintenance

Covers the maintenance of the spark arrestor screen, including cleaning.

MAINTENANCE - EXHAUST PORT

Exhaust Port Cleaning Procedure

Details the process for cleaning carbon deposits from the cylinder exhaust port.

MAINTENANCE - CARBURETOR

Carburetor Adjustment and Break-in

Explains carburetor adjustment, engine break-in, and high altitude operation.

MAINTENANCE - LUBRICATION

Gear Housing Lubrication

Guides on cleaning and lubricating the gear housing with grease.

MAINTENANCE - DRIVE SHAFT LUBRICATION

Lower and Upper Drive Shaft Lubrication

Details lubrication for both the lower and upper drive shaft assemblies.

MAINTENANCE - NYLON LINE REPLACEMENT

Replacing Trimmer Line Spool

Instructions for replacing the nylon trimmer line on the spool.

MAINTENANCE - NYLON LINE FEEDING

Feeding and Securing Trimmer Line

Explains how to feed new line through eyelets and secure it.

MAINTENANCE - BLADE SHARPENING

Sharpening 8-tooth Trimmer Blades

Guides on inspecting and sharpening the 8-tooth trimmer blade.

MAINTENANCE - BLADE REPLACEMENT

Edger Blade Replacement Procedure

Details the process for replacing the edger blade, including nut and pin.

TROUBLESHOOTING

Engine Problem Troubleshooting Chart

Lists common engine problems, their causes, and remedies for diagnosis.

STORAGE PROCEDURES

Storage Hook Installation

Instructions for installing the storage hook onto the attachment shaft.

Long Term Storage Maintenance

Outlines maintenance steps for storing the unit long-term (over 30 days).

PRODUCT SPECIFICATIONS

PAS-225 Value Pack Specifications

Lists detailed technical specifications including dimensions, weight, and engine details.

OPTIONAL ATTACHMENTS

Recommended Attachments List

Lists various recommended optional attachments available for the unit.

Barrier Bar Use Guidelines

Provides guidance on using barrier bars with specific PAS/SB attachments.

WARRANTY STATEMENTS

USA/Canada Limited Warranty Terms

Outlines the terms and conditions of the limited warranty for USA and Canada.

Owner's Warranty Responsibilities

Details the owner's role in maintaining warranty coverage, including registration.

Product Warranty Periods

Specifies warranty durations for residential, commercial, and rental applications.

WARRANTY STATEMENTS

Parts, Accessories, and Oil Warranty

Defines warranty for purchased parts, accessories, and emphasizes oil requirements.

Warranty Exclusions and Limitations

Lists conditions and damages not covered by the warranty.

EMISSION CONTROL WARRANTY

Emission Warranty Coverage and Responsibilities

Explains emission warranty period and owner's responsibilities for maintenance.

Emission Control Parts and Exclusions

Lists parts covered under emission warranty and items explicitly excluded.

SERVICING INFORMATION

Parts, Service, and Support Contacts

Information on obtaining parts, finding service dealers, and consumer support contacts.

Warranty Registration and Manuals

Guides on registering warranty and obtaining replacement manuals or safety videos.